Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
n DXP15
FBI1-7
C7P2
DI14
FBI1-6
C7P4
DXP13
FBI1-5
C6P2
DI12
FBI1-4
C6P4
see D301376,
Process input data – DXP channels – Basic
n + 1 -
n + 2 - DVS14 - DVS12 -
n + 3 -
} -
n + 24 to
n + 55
IO-Link port 1 (connector C6)
St
ructure depends on the channel parameterization
n + 56 to
n + 87
IO-Link port 2 (connector C7)
St
ructure depends on the channel parameterization
} -
(see
Diagnostic data (page 24))
Overcurrent diagnostics sensor supply
(IO-Link po
rt 1)
n + 88
-
VERRV1
C1213
-
n + 89 to n
+ 9
0
-
n + 91 SCO13 - SCO12 -
(description, see
Diagnostic data (page 24))
IO-Link, port 1
(c
onnector C6)
n + 92 EVT1 EVT2 PDINV HWER DSER CFGER PPE res.
n + 93 GENR OVL VHIGH VLOW ULVE LLVU OTMP PRMER
IO-Link, port 2
(c
onnector C7)
n + 94 to n
+ 9
5
assignment similar to port 1
(description, see
Subindex 64: Master Port Validation Configuration (page 35))
n + 96 Qualifier (1st Event)
n + 97 Port (1st Event)
n + 98 Event Code high byte (1st Event)
n + 99 Event Code low byte (1st Event)
}}
n + 156 Qualifier (16th Event)
n + 157 Port 16th Event)
n + 158 Event Code high byte (16th Event)
n + 159 Event Code low byte (16th Event)
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
14
3.6.2 Process input data – IO-Link master channels
Channel status
IO-Link process input data
Diagnostics
DXP diagnostics
IO-Link port diagnostics
IO-Link Events
To Next Page
Loading...
