Search with Scan Set Quick Key Assign this search range to a Quick Key so you can
easily enable or disable it during scanning. Enter a number from 0 to 99; tap ...
SetAlertTone
PaulOpitz
r4 - 24 Mar 2009 - 21:00
Set Alert Tone Choose one of the 9 different tone patterns for the scanner to use for the
alert tone: Alert 1 4000 Hz for 50 ms » Silence for 20 ms » 4000 ...
SetBearTracker
PaulOpitz
r5 - 13 May 2009 - 14:46
Set Bear Tracker The menu items under Set Bear Tracker affect how the Beartracker
Warning System operates. The Bear Tracker Warning system is turned on by
repeatedly ...
SetFrequencies
PaulOpitz
r7 - 13 May 2009 - 14:48
Set Frequencies This menu lets you create frequencies and edit existing ones. All
existing frequencies are listed in the order they were created: select the frequency ...
SetLocationInfo
PaulOpitz
r5 - 14 Apr 2009 - 16:11
Set LocationInfo Use this menu to configure geographic information for each system or
site. With this information and a standard NMEA GPS input, the scanner can
automatically ...
SettingAlerts
PaulOpitz
r5 - 17 Apr 2009 - 16:00
Setting alerts Your scanner can trigger alerts for several different events. The table
below shows the different alerts and how to program them: To sound an alert ...
SettingUpTheHardware
PaulOpitz
r7 - 24 Mar 2009 - 21:07
file:///C|/Documents%20and%20Settings/POpitz/My%20...temp/CDImage_090515/Manual/CategoryUsersGuide.html (15 of 18)5/26/2009 11:12:18 AM
To Next Page
