Uniden BCD396XT User Manual

AvailableOperationModes < UnidenMan4 < TWiki
set the interval for priority scan checks.
For more information about key operation and other specifics about Priority Scan mode,
see
Priority Scan.
To enter Priority Scan mode on the BCD396XT or BC346XT:
1. Enter Hold mode.
2. FUNCTION + tap NO.
To enter Priority Scan mode on the BCD996XT, press PRI.
To enter Priority Scan mode on the BCT15X, FUNCTION + press POL/
PRI.
If no conventional channels in enabled and unlocked systems are designated as priority,
the scanner will display Priority Scan No Channel.
For trunked priority channels, you need to enable priority scanning in the system option
menu as well as tagging the channel as priority. Trunked priority only works while
scanning that system's control channel or (in the case of Motorola systems) when the
scanner is scanning any channel in the system.
Priority Plus Scan mode
The scanner stops the current operation and only performs Priority Scan checks as
described above.
To enter Priority Plus Scan mode on the BCD396XT or BC346XT:
1. Enter Hold mode.
2. FUNCTION + repeatedly tap NO until the scanner displays
Priority Mode Plus On.
To enter Priority Plus Scan mode on the BCD996XT, press PRI until the
scanner displays Priority Mode Plus On.
To enter Priority Plus Scan mode on the BCT15X, FUNCTION +
file:///C|/Documents%20and%20Settings/POpitz/My%20D.../CDImage_090515/Manual/AvailableOperationModes.html (5 of 8)5/26/2009 11:12:22 AM

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm