Mode, see Weather Mode.
To enter Weather Priority mode on the BCD396XT or BC346XT,
FUNCTION + tap WX.
To enter Weather Priority mode on the BCD996XT, tap WX.
To enter Weather Priority mode on the BCT15X, FUNCTION + tap GPS/
WX.
Weather Alert mode
This is similar to Weather mode: the scanner checks each of the 10 National Weather
Radio channels and stays on a channel when it detects a signal. However, in Weather
Alert mode, the scanner only opens squelch if it detects the EAS alert tone. For more
information about Weather Alert Mode, see Weather Mode.
To enter Weather Alert mode on the BCD396XT or BC346XT:
1. Enter Weather mode.
2. FUNCTION+ tap WX.
To enter Weather Alert mode on the BCD996XT:
1. Enter Weather mode.
2. Tap WX .
To enter Weather Alert mode on the BCT15X:
1. Enter Weather mode.
2. FUNCTION + tap GPS/WX.
Tone Out mode
The scanner checks up to 10 user-programmed channels for two-tone sequential, single,
or group paging tones. When it detects a tone that matches the configuration for that
channel, the scanner displays the tone information and opens squelch. For more
file:///C|/Documents%20and%20Settings/POpitz/My%20D.../CDImage_090515/Manual/AvailableOperationModes.html (7 of 8)5/26/2009 11:12:22 AM
To Next Page
Loading...
