Uniden BCD396XT - Page 184

BCD996XTToneOutMode < UnidenMan4 < TWiki
● If you want to search a different channel, just turn the SCROLL knob until you find the channel you
want.
● To exit Tone-Out mode, tap SCAN.
● To hear all transmissions on a tone-out frequency, even when a tone-out has not been activated, press
HOLD. To return to Tone-Out Search mode, press HOLD again.
Key Operation in Tone Out Mode
Key Name
(2nd
operation)
Action On
PRIORITY
1 (Search 1) 2 (Search 2) 3 (Search 3)
Tap NA Enter a digit in Direct Entry mode.
FUNCTION
+ Tap
NA Start the search range assigned to this Search Key.
Key Name
(2nd
operation)
Action on:
Weather
4 (IF exchange) 5 (Level offset) 6 (Display mode)
Tap Toggle Weather
Priority Mode
Enter a digit in Direct Entry mode.
FUNCTION
+ Tap
Toggle Weather
Priority Mode
Toggle the IF for that the
current frequency.
NA NA
Press &
Hold
Go to Weather
Scan mode.
NA NA NA
Key Name
(2nd
operation)
Action on:
GPS
7 (Attenuation) 8 (Reverse freq.) 9 (Modulation)
Tap Switch to the GPS
Navigation
display.
Enter a digit in Direct Entry mode.
FUNCTION
+ Tap
Switch to the GPS
Navigation
display.
Toggle the attenuator
state.
NA Change the
modulation.
file:///C|/Documents%20and%20Settings/POpitz/My%2...mp/CDImage_090515/Manual/BCD996XTToneOutMode.html (2 of 4)5/26/2009 11:12:40 AM