Uniden BCD396XT - Page 185

BCD996XTToneOutMode < UnidenMan4 < TWiki
FUNCTION
+ Press &
hold
NA Toggle the attenuator
state for all signals.
NA NA
Key Name
(2nd
operation)
Action on:
Menu
. / No (Decimal) 0 Yes (Enter)
Tap Enter the Menu
Mode.
Enter a decimal point or
"i" in Direct Entry mode.
Enter a digit in Direct
Entry mode.
Go to the
configuration settings
for the selected tone-
out.
Function +
Tap
Enter the Menu
Mode at the "Tone-
Out for..." menu.
NA Go to the
configuration settings
for the selected tone-
out.
Key Name
(2nd
operation)
Action on:
SQUELCH
VOLUME
SCAN/SEARCH
HOLD/RESUME
Rotate Adjust Squelch. Adjust volume. Turn
fully counterclockwise
past click to turn off
scanner.
NA NA
Tap Change Close Call
mode.
Change backlight level. Go to Scan mode. Toggle Tone Out
Hold mode.
Press &
Hold
Go to Close Call
Only mode.
NA NA NA
FUNCTION
+ Tap
Go to Tone Out
Mode.
Toggle the P25 quality
display.
Prompt to go to Quick
Search mode.
Toggle Tone Out
Hold mode.
file:///C|/Documents%20and%20Settings/POpitz/My%2...mp/CDImage_090515/Manual/BCD996XTToneOutMode.html (3 of 4)5/26/2009 11:12:40 AM