Uniden BCD396XT - Page 188

BCD996XTCloseCallMode < UnidenMan4 < TWiki
Tap Toggle Weather
Priority Mode
Turn on/off the associated Close Call range.
FUNCTION
+ Tap
Toggle Weather
Priority Mode
When monitoring a
frequency, toggle the IF
for that frequency.
NA NA
Press &
Hold
Go to Weather
Scan mode.
NA NA NA
When
holding on a
frequency
Toggle Weather
Priority Mode.
Input the corresponding number in Direct Entry mode.
Key Name
(2nd
operation)
Action on:
GPS
7 (Attenuation) 8 (Reverse freq.) 9 (Modulation)
Tap Switch to the GPS
Navigation
display.
Turn off the associated
Close Call range.
NA NA
Press & hold NA NA NA NA
FUNCTION
+ Tap
Switch to the GPS
Navigation
display.
Toggle the attenuator
state.
NA Change the
modulation.
FUNCTION
+ Press &
hold
NA Toggle the attenuator
state for all signals.
If stopped on a
frequency that has a
valid reverse (input)
frequency, show the
repeater reverse
frequency for the
current frequency (the
scanner returns to the
original frequency
when you release the
key).
NA
When
holding on a
frequency
Switch to the GPS
Navigation
display.
Input the corresponding number in Direct Entry mode.
file:///C|/Documents%20and%20Settings/POpitz/My%20...p/CDImage_090515/Manual/BCD996XTCloseCallMode.html (2 of 4)5/26/2009 11:12:42 AM