Uniden BCD396XT - Page 189

BCD996XTCloseCallMode < UnidenMan4 < TWiki
Key Name
(2nd
operation)
Action on:
Menu
. / No (Decimal) 0 Yes (Enter)
Tap Enter the Menu
Mode.
NA NA If stopped on a
frequency, store the
current frequency.
FUNCTION
+ Tap
Enter the Close
Call Menu.
NA NA NA
When
holding on a
frequency
Enter the Menu
Mode.
Input the corresponding key in Direct Entry
mode.
Accept entered value
for Direct Entry
mode.
Key Name
(2nd
operation)
Action on:
SQUELCH
VOLUME
SCAN/SEARCH
HOLD/RESUME
Rotate Adjust Squelch. Adjust volume. Turn
fully counterclockwise
past click to turn off
scanner.
NA NA
Tap Turn off Close
Call mode.
Change backlight level. Go to Scan mode Hold on the most
recent Close Call hit
frequency. If you
have not received a
Close Call hit, NA.
Press &
Hold
NA NA NA NA
FUNCTION
+ Tap
Go to Fire Tone-
Out Mode
Go to P25 status mode. Go to the Quick
Search prompt.
If on a Close Call hit,
hold on the current
frequency. Otherwise,
NA.
file:///C|/Documents%20and%20Settings/POpitz/My%20...p/CDImage_090515/Manual/BCD996XTCloseCallMode.html (3 of 4)5/26/2009 11:12:42 AM