Uniden BCD396XT - Page 194

BCD996XTBandScopeMode < UnidenMan4 < TWiki
Tap Enter the Menu
Mode.
Press to enter the Band
Scope Setting mode and
select a setting. The
selected setting flashes.
In Band Scope Setting
mode, selects the next
setting.
NA Set the marker
frequency as the
center frequency.
In Band Scope Setting
mode, with CF
selected edit the
center frequency.
FUNCTION
+ Tap
Enter the Menu
Mode.
NA NA NA
Key Name
(2nd
operation)
Action on:
SQUELCH
VOLUME
SCAN/SEARCH
HOLD/RESUME
Rotate Adjust Squelch. Adjust volume. Turn
fully counterclockwise
past click to turn off
scanner.
NA NA
Tap Change Close Call
mode.
Change backlight level. Resume scanning. Hold on the current
frequency. Press again
to resume.
Press &
Hold
Go to Close Call
Only mode.
NA NA NA
FUNCTION
+ Tap
Go to Tone-Out
Mode.
Go to P25 status mode. Switch between Max
Hold Search mode
and Search Mode.
Hold on the current
frequency. Press again
to resume.
file:///C|/Documents%20and%20Settings/POpitz/My%20...p/CDImage_090515/Manual/BCD996XTBandScopeMode.html (4 of 5)5/26/2009 11:12:45 AM