REP icon The Repeater Find feature is turned on.
Signal level icon This icon displays the strength of the current signal; the icon
ranges from zero bars (no signal) to five bars (strong signal).
State-by-State icons PL: Indicates the Local Police search is turned on.
DT: Indicates the Department of Transportation search is
turned on.
HP: Indicates the Highway Patrol search is turned on.
BT: Indicates the Beartracker Warning System is turned on.
When any of these modes are turned on, the scanner will
interrupt other communications periodically to check for
activity.
System number line (Sx:) In Scan mode: The system/site Quick Key numbers (SQK) of
any unlocked systems or sites are displayed on this line. The
SQK number of the system or site that is currently being
scanned blinks. For SQK numbers above 9, the tens digit
replaces the X in the icon; the ones digits are shown on this
line.
In Hold mode: This line displays the SQK number of the
current system or site only. For SQK numbers above 9, the tens
digit replaces the X in the icon; the ones digit is displayed on
this line.
In Service Search mode: The icon SCR replaces the System
numbers if the broadcast screen feature is turned on.
V+0 Indicates the volume offset for the current channel (-3 to +3).
This icon appears above the System Number Line in the
Function mode. (Not illustrated.)
Weather alert icon Weather Alert Priority scan is turned on.
Special displays
In some operation modes, the display can be very different from the main display. These modes
file:///C|/Documents%20and%20Settings/POpitz/My%20...CDImage_090515/Manual/BCT15XReadingTheDisplay.html (4 of 5)5/26/2009 11:12:55 AM
To Next Page
Loading...
