Uniden BCD396XT - Page 226

BCT15XToneOutMode < UnidenMan4 < TWiki
Key Name
(2nd
operation)
Action on:
Menu
. / No (Decimal) 0 Yes (Enter)
Tap Enter the Menu
Mode.
Enter a decimal point or
"i" in Direct Entry mode.
Enter a digit in Direct
Entry mode.
Go to the
configuration settings
for the selected tone-
out.
Function +
Tap
Enter the Menu
Mode at the "Tone-
Out for..." menu.
NA Go to the
configuration settings
for the selected tone-
out.
Key Name
(2nd
operation)
Action on:
SQUELCH
VOLUME
SCAN/SEARCH
HOLD/RESUME
Rotate Adjust Squelch. Adjust volume. Turn
fully counterclockwise
past click to turn off
scanner.
NA NA
Tap Temporarily mute
alerts. Tap again to
restore.
Change backlight level. Go to Scan mode. Toggle Tone Out
Hold mode.
Press &
Hold
Permanently mut
alerts. Tap again to
restore.
NA NA NA
FUNCTION
+ Tap
Toggle Close Call
modes.
Select the state to use for
state-by-state searches.
Prompt to go to Quick
Search mode.
Toggle Tone Out
Hold mode.
FUNCTION
+ Press &
Hold
Go to Close Call
Only mode.
NA
file:///C|/Documents%20and%20Settings/POpitz/My%20.../temp/CDImage_090515/Manual/BCT15XToneOutMode.html (3 of 4)5/26/2009 11:12:59 AM