Uniden BCD396XT - Page 225

BCT15XToneOutMode < UnidenMan4 < TWiki
● To hear all transmissions on a tone-out frequency, even when a tone-out has not been activated, press
HOLD. To return to Tone-Out Search mode, press HOLD again.
Key Operation in Tone Out Mode
Key Name
(2nd
operation)
Action On
Police /
PRIORITY
1 (Search 1) 2 (Search 2) 3 (Search 3)
Tap Go to Scan mode. Enter a digit in Direct Entry mode.
FUNCTION
+ Tap
NA Start the search range assigned to this Search Key.
Key Name
(2nd
operation)
Action on:
Highway Patrol /
Alert Plus
4 (IF exchange) 5 (Level offset) 6 (Display mode)
Tap Go to Scan mode. Enter a digit in Direct Entry mode.
FUNCTION
+ Tap
Start scanning in
Alert Plus mode.
Toggle the IF for that the
current frequency.
NA NA
Key Name
(2nd
operation)
Action on:
GPS / Weather
7 (Attenuation) 8 (Reverse freq.) 9 (Modulation)
Tap Switch to the GPS
Navigation display.
Enter a digit in Direct Entry mode.
FUNCTION
+ Tap
Toggle Weather
Alert Priority
mode.
Toggle the attenuator
state.
NA Change the
modulation.
FUNCTION
+ Press &
hold
Go to Weather
Scan mode.
Toggle the attenuator
state for all signals.
NA NA
file:///C|/Documents%20and%20Settings/POpitz/My%20.../temp/CDImage_090515/Manual/BCT15XToneOutMode.html (2 of 4)5/26/2009 11:12:59 AM