Uniden BCD396XT - Page 229

BCT15XCloseCallMode < UnidenMan4 < TWiki
FUNCTION
+ Tap
Start scanning in
Alert Plus mode.
When monitoring a
frequency, toggle the IF
for that frequency.
NA NA
Press &
Hold
NA NA NA NA
When
holding on a
frequency
Same functions as
normal Close Call
mode.
Input the corresponding number in Direct Entry mode.
Key Name
(2nd
operation)
Action on:
GPS / Weather
7 (Attenuation) 8 (Reverse freq.) 9 (Modulation)
Tap Switch to the GPS
Navigation display.
Turn off the associated
Close Call range.
NA NA
FUNCTION
+ Tap
Toggle Weather
Alert Priority
mode.
Toggle the attenuator
state.
NA Change the
modulation.
FUNCTION
+ Press &
hold
Go to Weather
Scan mode.
Toggle the attenuator
state for all signals.
If stopped on a
frequency that has a
valid reverse (input)
frequency, show the
repeater reverse
frequency for the
current frequency (the
scanner returns to the
original frequency
when you release the
key).
NA
When
holding on a
frequency
Same functions as
normal Close Call
mode.
Input the corresponding number in Direct Entry mode.
Key Name
(2nd
operation)
Action on:
Menu
. / No (Decimal) 0 Yes (Enter)
Tap Enter the Menu
Mode.
NA NA If stopped on a
frequency, store the
current frequency.
file:///C|/Documents%20and%20Settings/POpitz/My%20...emp/CDImage_090515/Manual/BCT15XCloseCallMode.html (2 of 4)5/26/2009 11:13:02 AM