Uniden BCD396XT - Page 234

BCT15XBandScopeMode < UnidenMan4 < TWiki
Key Name
(2nd
operation)
Action on:
Highway Patrol /
<nop>BearTracker /
Alert
4 (IF exchange) 5 (Level offset) 6 (Display mode)
Tap Go to Scan Mode. NA
FUNCTION
+ Tap
Go into Alert Plus
mode and start
scanning.
Toggle the IF for that the
current frequency.
NA NA
Key Name
(2nd
operation)
Action on:
GPS / Weather
7 (Attenuation) 8 (Reverse freq.) 9 (Modulation)
Tap Switch to the GPS
Navigation display.
NA
FUNCTION
+ Tap
Toggle the Weather
Alert Priority mode.
Toggle the attenuator
state.
NA Change the
modulation.
FUNCTION
+ Press &
hold
Start Weather Scan. Toggle the attenuator
state for all signals.
NA NA
Key Name
(2nd
operation)
Action on:
Menu
. / No (Decimal) 0 Yes (Enter)
Tap Enter the Menu
Mode.
Press to enter the Band
Scope Setting mode and
select a setting. The
selected setting flashes.
In Band Scope Setting
mode, selects the next
setting.
NA Set the marker
frequency as the
center frequency.
In Band Scope Setting
mode, with CF
selected edit the
center frequency.
FUNCTION
+ Tap
Enter the Menu
Mode.
NA NA NA
file:///C|/Documents%20and%20Settings/POpitz/My%20...emp/CDImage_090515/Manual/BCT15XBandScopeMode.html (3 of 5)5/26/2009 11:13:04 AM