Uniden BCD396XT - Page 235

BCT15XBandScopeMode < UnidenMan4 < TWiki
Key Name
(2nd
operation)
Action on:
SQUELCH
VOLUME
SCAN/SEARCH
HOLD/RESUME
Rotate Adjust Squelch. Adjust volume. Turn
fully counterclockwise
past click to turn off
scanner.
NA NA
Tap Stop the alert tone
and set the scanner to
temporary mute
alerts. Press again to
cancel.
Change backlight level. Resume scanning. Hold on the current
frequency. Press again
to resume.
Press &
Hold
Permanently mute
alerts. Press again to
cancel.
NA NA NA
FUNCTION
+ Tap
Toggle Close Call
Modes.
Select the current state. Switch between Max
Hold Search mode
and Search Mode.
Hold on the current
frequency. Press again
to resume.
Key Name
(2nd operation)
Action on:
LOCKOUT
SCROLL - FUNCTION
Rotate NA Change the marker frequency one step frequency per click.
In Band Scope Setting mode, change the selected parameter
(except CF).
Function +
Rotate
NA Change the marker frequency one "bar" per click.
file:///C|/Documents%20and%20Settings/POpitz/My%20...emp/CDImage_090515/Manual/BCT15XBandScopeMode.html (4 of 5)5/26/2009 11:13:04 AM