Uniden BCD396XT User Manual

BCT15XGPSMode < UnidenMan4 < TWiki
Press &
Hold
Overwrite the
selected location
with the current
location.
NA NA Unlock all locations
of the current type
(POI, Dangerous
Road, Dangous
Crossing)
FUNCTION
+ Press &
Hold
NA NA NA Display "Unlock All
Locations?" If you
press E/YES all
locations of all types
are unlocked.
Key Name
(2nd
operation)
Action on:
SQUELCH
VOLUME
SCROLL - FUNCTION
SCAN/SEARCH
HOLD/RESUME
Rotate Adjust Squelch. Adjust volume. Turn
fully counterclockwise
past click to turn off
scanner.
Select a location. NA NA
Tap NA Change backlight level. Activate the FUNCTION
mode for the next keypress.
Go to Scan Mode Go to Scan Hold
mode.
Press &
Hold
NA NA "Latch" the FUNCTION
mode. Scanner stays on the
current system and all
keypresses use the
FUNCTION mode until
you tap the control again.
NA NA
Keypad controls in GPS Mode
Keys not listed have no function in this mode.
Key
Name
(2nd
operation)
Action on:
GPS / Weather
MENU
Yes (Enter)
LOCKOUT
6 / DISPLAY
Tap NA Go to the Menu mode. Go to the review location
mode.
Temporarily lockout
the current location
alert if it one is active.
NA
Double
Tap
NA NA NA Permanently lockout
the current location
alert if it one is active.
NA
Press &
Hold
Store the current
location.
NA NA NA NA
file:///C|/Documents%20and%20Settings/POpitz/My%20...ents/temp/CDImage_090515/Manual/BCT15XGPSMode.html (4 of 5)5/26/2009 11:13:07 AM

Uniden BCD396XT Specifications

General

Belt clip	Yes

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	51 x 25 x 1152 mm