Uniden BCD396XT - Page 775

217
Program System , ← [L2_CHAR]
****************, ← [L2_MODE]
Program Location, ← [L3_CHAR]
, ← [L3_MODE]
Srch/CloCall Opt, ← [L4_CHAR]
, ← [L4_MODE]
1,0,0,0,,,0,,,[\r]
Returns current scanner status.
Ex.2) ┌----------------┐
｜ HOLD L/O |
│System 1 ｜ Squelch Status : CLOSE
│ 851.0125MHz | Mute Status : ON
│ P NFM ATT | Battery Low Status : No Alert
│S1: 5 | Weather Alert Status : Alert
｜GRP 2 WX |
└----------------┘
→ STS[\r]
← 011000,
HOLD L/O , ← [L1_CHAR]
, ← [L1_MODE]
SYSTEM 1 , ← [L2_CHAR]
, ← [L2_MODE]
851.0125MHz , ← [L3_CHAR]
, ← [L3_MODE]
P NFM ATT , ← [L4_CHAR]
, ← [L4_MODE]
S1: 5 , ← [L5_CHAR]
, ← [L5_MODE]
GRP 2 WX, ← [L6_CHAR]
, ← [L6_MODE]
0,1,0,0,,,1,,,[\r]
Returns current scanner status.