Uniden BCD396XT - Page 776

218
<COMMAND GLG>
Get Reception Status
Controller → Radio
GLG[\r]
Radio → Controller
GLG,[FRQ/TGID],[MOD],[ATT],[CTCSS/DCS],[NAME1],[NAME2],[NAME3],[SQL],[MUT],
[SYS_TAG],[CHAN_TAG],[RSV][\r]
GLG,,,,,,,,,,[\r]
[FRQ/TGID] : Frequency or TGID
[MOD] : Modulation (AM/FM/NFM/WFM/FMB)
[ATT] : Attenuation (0:OFF / 1:ON)
[CTCSS/DCS] : CTCSS/DCS Status (0-231)
*See CTCSS/DCS CODE LIST about the details of this code.
[NAME1] : System, Site or Search Name
[NAME2] : Group Name
[NAME3] : Channel Name
[SQL] : Squelch Status (0:CLOSE / 1:OPEN)
[MUT] : Mute Status (0:OFF / 1:ON)
[SYS_TAG] : Current system number tag (0-999/NONE)
[CHAN_TAG] : Current channel number tag (0-999/NONE)
[RSV] : Reserve parameter, always “,”
Get reception status.
The Scanner returns GLG,,,,,,,,,[\r] until it detects a frequency or a TGID.
<COMMAND JPM>
Jump Mode
Controller → Radio
JPM,[JUMP_MODE],[INDEX][\r]
Radio → Controller
JPM,OK[\r]
[JUMP_MODE] : SCN_MODE Scan mode
SVC_MODE Service Search mode
CTM_MODE Custom Search mode
CC_MODE Close Call Only mode
WX_MODE WX SCAN mode
FTO_MODE Tone-Out mode
[INDEX] : SCN_MODE Channel Index
SVC_MODE PublicSafety
News
HAM
Marine
Railroad
Air
CB
FRS/GMRS/MURS
Racing
FM
Special