In Custom Search mode: The numbers of any
programmed search ranges are display on this line. The
number of the custom range that is currently being
searched blinks.
Hold icon The scanner is in Hold mode.
IFX icon You switched to the intermediate frequency (IF
exchange).
Keypad lock (or GPS)
icon
(key symbol): The keypad is locked.
GPS: The scanner is receiving data from the GPS
device.
Lockout icon The current channel is locked out.
Modulation icon This icon displays the modulation type of the current
channel: AM, FM, NFM, FMB, or WFM.
Priority icon The current channel is set as a priority channel.
Priority scan icon (PRI) Steady: Priority scan is turned on.
Blinking: Priority Plus scan is turned on.
REP icon The Repeater Find feature is turned on.
Signal level icon This icon displays the strength of the current signal;
the icon ranges from zero bars (no signal) to five bars
(strong signal).
System number line (Sx:) In Scan mode: The system/site Quick Key numbers
(SQK) of any unlocked systems or sites are displayed
on this line. The SQK number of the system or site that
is currently being scanned blinks. For SQK numbers
above 9, the tens digit replaces the X in the icon; the
ones digits are shown on this line.
In Hold mode: This line displays the SQK number of
the current system or site only. For SQK numbers
above 9, the tens digit replaces the X in the icon; the
ones digit is displayed on this line.
file:///C|/Documents%20and%20Settings/POpitz/My%20D...nts/temp/CDImage_090515/Manual/BC346XTDisplays.html (3 of 4)5/26/2009 11:14:39 AM
To Next Page
