Blinking icon: The battery is low. (If the AC adapter is
connected while the icon is blinking, the battery is
incorrectly installed, is the wrong type, or has gone
bad.)
Channel Info icon Cxx.x: The scanner has detected a CTCSS code; the
received code is displayed in place of the Xs.
DCSxxx: The scanner has detected a DCS code; the
received code is displayed in place of the Xs.
Close call icon Normal (open) icon:
● Steady: Close call priority mode is on.
● Blinking: Close Call Only mode is on, or the
scanner has detected a close call signal.
Reversed (filled) icon:
● Steady: Close call DND mode is on.
Function icon Steady: You tapped the FUNCTION key; the scanner
will remember the FUNCTION + key combination for
the next 3 seconds.
Blinking: You pressed & held the FUNCTION key:
the scanner will remember the FUNCTION + key
combination until you tap FUNCTION again.
Group number line (GRP) In Scan mode: The group Quick Key numbers (GQK)
of any unlocked groups in the current system or site
are displayed on this line. The GQK number of the
group that is currently being scanned blinks.
In Hold mode: This line displays the GQK number of
the current group only.
file:///C|/Documents%20and%20Settings/POpitz/My%20D...nts/temp/CDImage_090515/Manual/BC346XTDisplays.html (2 of 4)5/26/2009 11:14:39 AM
To Next Page
Loading...
