Set Dimmer
Selects whether the backlight brightness is set automatically or manually.
Auto: Select Polarity
+
Polarity
The backlight dims when +12V is applied to the orange lead.
- Polarity The backlight dims when +12V is not being applied to the orange
lead.
Manual
Manually select the brightness of the backlight. Your options are high (brightest),
middle, and low (dimmest).
Set Color
Select the color of the backlight. Your options are blue, red, magenta, green, cyan,
yellow, and white.
Adjust Key Beep
Select the volume level (Level 1 through Level 15) you want the keybeep to use, or
select Auto to have the scanner sound the keybeep without changing the volume. If you
don't want the scanner to beep when you press the keys, select Off .
Adjust Audio AGC
Configure how the scanner handles the Automatic Gain Control (AGC) for Analog and
Digital signals:
Parameter Definition Analog settings Digital settings
file:///C|/Documents%20and%20Settings/POpitz/My%20D...ts/temp/CDImage_090515/Manual/BCD996XTSettings.html (2 of 6)5/26/2009 11:15:47 AM
To Next Page
Loading...
