Response Time How frequently the
AGC factor updates.
Decrease this value to
make AGC respond
faster (but this could
result in pumping).
Increase this value to
make AGC respond
more slowly.
-4 to +6 (default=0) -8 to +8
(default=0)
Reference
Gain
The reference level that
AGC attempts to adjust
the volume to. If digital
and analog volumes
don't match, adjust this
parameter.
-5 to +5 (default=0) -5 to +5
(default=0)
Gain Range The total dynamic
range of the AGC
adjustments. A larger
value allows a wider
variation in volume.
_0_ to 15 (default=6) NA
Set Upside-down
Lets you invert the display. Useful if you are mounting the scanner in an overhead space.
Adjust Contrast
Select one of the 15 available contrast levels for the display. As you scroll through the
options, the display adjusts to the highlighted contrast level; press YES when you see the
display contrast you want to use.
Set C-CH Output
Choose how you want the scanner to handle control channel data:
● Off : The scanner will not output the control channel data.
● On : The scanner will output the control channel data.
file:///C|/Documents%20and%20Settings/POpitz/My%20D...ts/temp/CDImage_090515/Manual/BCD996XTSettings.html (3 of 6)5/26/2009 11:15:47 AM
To Next Page
Loading...
