Search and Store
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
With this feature, the scanner searches a system and saves any frequencies it finds
activity on. When the scanner detects activity on a frequency, it verifies that the
frequency has not already been stored, then adds the frequency to the Found Channels
group. (Since these frequencies are stored with individual systems, you must have at
least one programmed system to use the Search and Store feature.)
The scanner displays a list of all programmed systems. Select the system you want to
search and add found channels to. The options you have depend on the type of system
you select:
● If the system you selected is a conventional system , the scanner prompts you to
select a custom search or a preset service search range.
● If the system you selected is a trunked system , the scanner prompts you to
select a site within that system. The scanner searches the site for active Talk
Groups and stores the Talk Group ID to the Found Channels group. (If the site
you selected is locked, the scanner automatically unlocks it and begins the
search.)
● If the system you selected is an EDACS SCAT system , the scanner displays an
error message: the search and store feature can't be used on EDACS SCAT
systems.
Back to Search menu
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/SearchAndStore.html5/26/2009 11:15:59 AM
To Next Page
Loading...
