Select the number of kHz between each channel. Choose 5.0, 6.25, 7.5, 8.33, 10.0, 12.5,
15.0, 20.0, 25.0, 50.0 or 100.0 kHz. Select Auto to use the default step for this band.
Set C-Ch Only
If you set C-Ch Only Mode to On, the scanner will only search for control channel data.
If it detects such data it will stop on the control channel and display channel activity for
the found system. For Motorola systems, it will try to follow voice channel traffic using
the Motorola Band Plan you select in the next setting. It will also display the name of the
found system if the system's ID matches a known system.
Set MOT Band Plan
If this custom search is a Motorola system, you need to select a band plan, just like you
do when you program a Motorola system for scanning. See Edit Band Plan for more
information.
Set Audio AGC (BCD996XT and BCD396XT Only)
Turn on Automatic Gain Control (AGC) for this system. When you activate this feature,
the scanner automatically adjusts the volume for each channel based on the signal
strength. You can turn on the gain control for Analog and Digital signals separately.
To change the settings for the audio AGC, see Adjust Audio AGC
Set Record (BCD996XT and BCT15X Only)
Set the scanner to provide the audio from found transmissions to the RECORD OUT
jack on the back of the scanner.
P25 Waiting Time (BCD996XT and BCD396XT Only)
When searching in a band that has a mix of analog and digital signals (i.e., where the
Audio Mode is set to All), it is possible to have false decode problems that results in
digital noise at the beginning of transmissions. To prevent this, a user-configurable P25
wait time (from 0 to 1000 ms) has been added.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/SearchFor.html (5 of 6)5/26/2009 11:16:00 AM
To Next Page
Loading...
