Srch/CloCall Opt
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
This menu lets you set general options for how the scanner operates in Search and Close
Call modes.
● Freq Lockouts
● Broadcast Screen
❍ Set All Band On
❍ Set All Band Off
❍ Set Each Band
❍ Program Band
● Tone/Code Search (BCD396XT and BCD996XT)
● CTCSS / DCS Search (BC346XT and BCT15X)
● Repeater Find
● Max Auto Store
● Set Delay Time
● Set Attenuator
● Set Audio AGC (BCD996XT and BCD396XT only)
● Set Record (BCD996XT and BCT15X only)
● P25 Waiting Time (BCD396XT and BCD996XT only)
Freq Lockouts
● Rvw Search L/O : This option displays a list of all locked out frequencies. To
unlock any frequency on the list, just select it and press YES .
● Unlock All : This option removes the locks on all frequencies at once.
Broadcast Screen
Choose whether you want the scanner to screen out common broadcast bands and ignore
hits on these bands. You can screen out signals on 5 preset bands and up to 10 custom
file:///C|/Documents%20and%20Settings/POpitz/My%20D...ents/temp/CDImage_090515/Manual/SrchCloCallOpt.html (1 of 4)5/26/2009 11:16:02 AM
To Next Page
