WX Operation
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
This menu lets you configure how the scanner operates in Weather (WX) mode and
Weather Alert (WX Alert) mode.
● Weather Scan
● Weather Alert
❍ Alert Only
❍ SAME 1 through SAME 5
❍ All FIPS
● Program SAME
❍ Edit Name (SAME)
❍ Edit County
● Set Delay Time
● Set Attenuator
● Set Record (BCT15 Only)
● WX Alt Priority
Weather Scan
Start a normal weather scan. In normal weather scan mode, the scanner does not react to
alert tones on weather channels.
Weather Alert
Choose how you want the scanner to filter any alerts it detects on the weather channels:
Alert Only
The scanner responds to all alert tones detected on the weather channels, regardless of
region or hazard level. When an alert is detected, the scanner sounds an alert siren and
opens squelch on the weather channel.
file:///C|/Documents%20and%20Settings/POpitz/My%20D...s/temp/CDImage_090515/Manual/AnalogWXOperation.html (1 of 3)5/26/2009 11:16:08 AM
To Next Page
Loading...
