ArcLight Hub User’s Guide
Component Operating Procedures
Rev. 001 1081006 5-79
Table 5-20: Rear Panel LED Indicators
LED Color Normal
Status
Function
100 Mbps
Link (left side
of TERR and
SAT
interfaces)
Yellow On Yellow light on indicates that the Compact xPEP
has established a 100 Mbps connection with an
external device.
If not lit, a 100 Mbps connection has NOT been
established.
10/1000
Mbps Link
(right side of
TERR and
SAT
interfaces)
Green or
Orange
Off Green light on indicates that the Compact xPEP
has established a 10 Mbps connection with an
external device.
Orange light on indicates that the Compact xPEP
has established a 1000 Mbps connection with an
external device.
If not lit, neither a 10 nor a 1000 Mbps
connection has NOT been established.
Control Type Normal
Status
Function
RESET Push
button
Reboots the device when depressed.
PWR Push
button
Powers off the device when depressed.
5.16.3 Installation
Refer to the ViaSat Compact xPEP User Manual for unpacking and
inspection details.
Note: Do not discard the Dual Rack Mount labels attached to the top
cover of the Compact xPEP.
5.16.3.1 Dual Rack Mount Kit
5.16.3.1.1 Compact xPEP Assembly
Two Compact xPEPs can be placed in the same Dual Rack Mount Kit
(or within a PBR unit). Refer to the ArcLight Hub Installation Guide and
the ViaSat Compact xPEP User Manual for installation details.
5.16.4 Configuration
Refer to the ViaSat Compact xPEP User Manual for configuration details.
5.16.5 Operation
Refer to the ViaSat Compact xPEP User Manual for Operation details.
5.16.6 Monitoring
Refer to the ViaSat Compact xPEP User Manual for monitoring details.
5.16.7 Troubleshooting
Refer to the ViaSat Compact xPEP User Manual for troubleshooting
details.
To Next Page
Loading...