ArcLight Hub User’s Guide
Screen Descriptions for NMS Client
3-20 1081006 Rev. 001
ATI File – this is the ATI configuration file that a VMT is supposed to
have downloaded. Select the file from the drop down list.
Password File – this is the password configuration file that a VMT is
supposed to have downloaded. Select the file from the drop down list.
IP Network Configuration – select the IP network configuration from
the pull down list.
FLR FPGA1 Image – select the image file to be used for FPGA1 from
the pull down list.
FLR FPGA2 Image - select the image file to be used for FPGA2 from the
pull down list.
Fan Configuration File – select the fan configuration file to be used for
this configuration from the pull down list.
OK button – Does same thing as Apply button, but also closes the
current screen.
Apply button –When clicked, causes any new values entered in all
fields on all tab screens to be stored in the NMS memory and
subsequently sent to the MCD. The current screen will remain open.
Cancel button – When clicked, causes any new values entered in the
fields on any Tab screen to be discarded, closes the current screen, and
reverts to the next higher-level screen in the hierarchy. The next time
the screen is opened the values that existed before the current editing
session will appear. The Cancel button will not undo use of the OK or
Apply buttons.
To Next Page