ArcLight Hub User’s Guide
Screen Descriptions for NMS Client
3-22 1081006 Rev. 001
Enable Dynamic Routing Check Box – Clicking the check box will
enable dynamic routing, leaving it unchecked disables dynamic routing.
OK button – Does same thing as Apply button, but also closes the
current screen.
Apply button –When clicked, causes any new values entered in all
fields on all tab screens to be stored in the NMS memory and
subsequently sent to the MCD. The current screen will remain open.
Cancel button – When clicked, causes any new values entered in the
fields on any Tab screen to be discarded, closes the current screen, and
reverts to the next higher-level screen in the hierarchy. The next time
the screen is opened the values that existed before the current editing
session will appear. The Cancel button will not undo use of the OK or
Apply buttons.
To Next Page