OM EZ38 us 1.1 * ez38b510.fm 5-21
5
Proportional controls (option)
The proportional controls make it possible to adjust the movement speed
of the attachment. Moving the slide switch slowly causes the attachment
to move slowly.
This control mode offers proportional operation of the auxiliary hydraulics
depending on the position of slide switch A on the control lever.
If precision work (for example with an offset bucket) does not require the
full oil flow of the auxiliary hydraulics (AUX I and AUX II), the oil flow can
be set progressively with the rotary switch.
If the full oil flow is required, turn the rotary switch to the right (MAX).
Fig. 150 (left-hand control lever base)
Fig. 151 (right-hand control lever base)
To Next Page
Loading...
