EasyManua.ls Logo

Wacker Neuson EZ38 - Every 500 Service Hours or Once a Year (Wacker Neuson Service Center); Every 1000 Service Hours (Wacker Neuson Service Center)

Wacker Neuson EZ38
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-4 OM EZ38 us 1.1 * ez38w700.fm
7
Every 500 service hours or once a year (Wacker Neuson service center)
Engine oil replacement --
Engine oil filter replacement --
Fuel filter replacement --
Clean the water separator (prefilter element) --
Hydraulic oil filter insert replacement --
Replace the V-belt --
Drain the condensation water from the hydraulic oil reservoir --
Check the drive gearbox oil --
Clean the dust valve --
Check bearing play of tread rollers, track carrier rollers, front idlers --
Check the electric cables and connectors (cable and earth connections etc.) --
Check the threaded fittings for tightness --
Clean the cabin air filter (replace it if necessary) --
Reset the maintenance meter --
Option
Check the oil level in the air conditioning compressor and the threaded fitting for tightness --
Check the dehumidifier of the air conditioning system (visual check) --
Check Powertilt for axial play (must not be over 0.38 mm/0.015 in) --
All steps for maintenance once a day and once a week --
Every 1000 service hours (Wacker Neuson service center)
Coolant replacement --
Hydraulic oil replacement --
Replacement of hydraulic oil reservoir breather filter --
Drive gearbox oil replacement --
Replacement of air filter element
1
--
Check valve clearance, adjust if necessary --
Change cabin air filter --
Pressure check of primary pressure limiting valves --
Check the battery condition (charge condition, terminals etc.) --
Option
Wear of load hook and joint rod (check at least once a year) --
All steps for maintenance once a day and once a week (and all steps for maintenance at
500 service hours)
--
1. Air filter replacement according to the indicator light, every 1000 s/h or once a year at the latest. (Replace after 50 s/h when in extensive use in environments
with acidic air, such as acid production facilities, steel and aluminium mills, chemical plants and other nonferrous-metal plants, independently of the indicator
light)

Table of Contents

Related product manuals