4-24 OM EZ38 us 1.1 * ez38i400.fm
4
Protective FOPS structure/large screen – level I (option)
Crushing hazard! Falling objects.
Will cause severe injury or death.
► Install a protective FOPS structure in areas with risk of falling objects.
► Machine operation is prohibited without a protective FOPS structure.
The protective FOPS structure corresponds to level I according to ISO
3449:2008.
► The machine owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.
► The machine owner must ensure that only work is performed that does
not require any higher protection.
► Accidents cannot be fully avoided despite equipping a machine with
protective structures.
To Next Page
Loading...
