Wacker Neuson EZ38 - Fuse Box; Raising or Lowering the Cabin

OM EZ38 us 1.1 * ez38w700.fm 7-15
7
Fuse box
Opening:
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Open the engine cover.
3. Loosen screws A and remove the cover.
Closing:
1. Install the cover and tighten screws A.
2. Close the engine cover.
Raising or lowering the cabin
WARNING
Crushing hazard by raising or lowering the cabin!
Raising or lowering the cabin can cause serious injury or death.
► All persons must stay clear of the cabin as you raise and lower it.
► Safely store all loose objects inside the machine.
► Always close and lock the door and windows before raising the cabin.
NOTICE
Damage to lift pump due to unclosed valve.
► Turn the lift pump valve clockwise.
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Raise the floor mat on the right side in the cabin.
3. Loosen lock nut A.
Fig. 221
A
Fig. 222
A