Wacker Neuson EZ38 - Opening the Front Window to a Gap (Ventilation Position); Opening;Closing the Side Window

OM EZ38 us 1.1 * ez38i400.fm 4-9
4
Opening the front window to a gap (ventilation position)
Open
1. Press levers A on either side and pull the front window to the inside.
2. Release levers A and let them engage in both locks B.
Close
1. Press levers A on either side.
2. Press the front window forward and let it engage.
Opening/closing the side window
Open
Press lever D upward and let the side window engage in the required
recess.
Close
Press lever D upward and close.
Fig. 69
Fig. 70
B
A
Fig. 71
D