5-2 OM EZ38 us 1.1 * ez38b500.fm
5
Automatic engine speed setting (option Tier IV interim)
The switch is located on the right-hand switch panel.
Diesel engine speed is automatically reduced to idling after 5 seconds if
no hydraulic functions are performed and if the automatic engine speed
setting is enabled.
As soon as a hydraulic function is performed with the control levers/travel
levers, Diesel engine speed is automatically increased again to the engine
speed adjusted with the throttle.
5.3 Brakes
Hydraulic brake
Releasing the travel levers/travel pedals brakes the machine.
During traveling downhill, the automatic hydraulic brake valves prevent
the machine from traveling faster than the admissible travel speed.
Reduce travel speed with the travel levers/travel pedals, and not with the
engine speed control of the engine.
Mechanical brake
The stabilizer blade is used as a parking brake. Press the stabilizer blade
against the ground.
Position Function
ON Press switch 47 down
Automatic engine speed set-
ting is enabled, the indicator
light in switch 47 illuminates
OFF Press switch 47 up
Automatic engine speed set-
ting is disabled, the indicator
light in switch 47 goes out
To Next Page
Loading...
