5-54 OM EZ38 us 1.1 * ez38b510.fm
5
Tilting the upper carriage (Vertical Digging System) (option)
In order to be able to dig vertically, slopes up to 15° (27 %) can be
compensated with the Vertical Digging System (VDS).
Crushing hazard due to tipping over of machine!
Will cause severe injury or death.
► On a slope, position the machine so that the upper carriage is tilted
toward the slope.
► Tilt the machine only on firm ground.
► Perform smooth and slow movements with the machine.
► Tilt the machine only if it is at a standstill and if the attachment is
empty.
► Never turn, lower, or set down the attachments abruptly.
► Do not extend or retract the boom abruptly.
► Do not exceed a maximum lateral angle of inclination of 10° on a slope.
► Do not exceed a maximum angle of 15° on an uphill or downhill slope.
► – see chapter “ Traveling on slopes” on page 5-4
Crushing hazard due to tilting the machine in the immediate vicinity
of walls or parts of buildings.
Can cause severe injury or death.
► Ensure that no parts of the body protrude outside the machine.
► All persons must stay clear of the danger zone when tilting the
machine.
► Neither access nor leave the machine when it is tilted.
To Next Page
Loading...
