Wacker Neuson EZ38 - Work Operation; Inadmissible Work Procedures; Working with the Swivel Force; Working with the Travel Force

5-42 OM EZ38 us 1.1 * ez38b510.fm
5
5.11 Work operation
Inadmissible work procedures
Working with the swivel force
• Do not use the swivel force of the upper carriage to tear down walls or
to create level surfaces.
• Never ram the attachment into the ground when swiveling the upper
carriage.
➥ This can damage the machine or the attachment.
Working with the travel force
• Never ram the attachment into the ground to dig when traveling.
➥ This can damage the machine or the attachment.
Retracting the attachment
• During retracting the attachment, ensure that it does not touch the
stabilizer blade.
Avoid impact during operation to avoid damage to the excavator
bucket and machine components.
• Do not use the falling force of the attachment as a hoe, hammer or pile-
driver.
➥ Working this way can greatly reduce the machine’s service life.
Fig. 187
Fig. 188
Fig. 189
Fig. 190