Wacker Neuson EZ38 - Fastening the Seat Belt; Unfastening the Seat Belt; Longer Seat Belt Adjustment; Shorter Seat Belt Adjustment

4-14 OM EZ38 us 1.1 * ez38i400.fm
4
Fastening the seat belt
1. Insert buckle latch A into seat belt buckle B with an audible click.
2. Tighten seat belt C by pulling at its end.
Unfastening the seat belt
1. Press the red pushbutton switch D on seat belt buckle B until the
buckle latch comes out.
2. Place seat belt C aside.
Longer/shorter seat belt adjustment
Longer seat belt adjustment
Hold buckle latch A at a right angle to the seat belt and pull the seat belt to
the required length.
Shorter seat belt adjustment
Pull the free end of the seat belt and shorten it to the required length.
Fig. 76
A
B
C
Fig. 77
C
B
D
Fig. 78
A