7-50 OM EZ38 us 1.1 * ez38w710.fm
7
7.16 Axles/Traveling drive
Have maintenance only performed by a Wacker Neuson service center.
7.17 Brake system
Have maintenance only performed by a Wacker Neuson service center.
7.18 Tires/Tracks
Information regarding the tracks
Track wear can vary according to work and ground conditions.
Checking track tension
Crushing hazard when working under the machine!
Can cause severe injuries or death.
► Ensure that no one is in the danger zone.
1. Park the machine on firm, level and horizontal ground.
2. Raise the machine evenly and horizontally by means of the boom and
the stabilizer blade.
3. Place the tracks so that mark A is in the middle between travel pinion B
and track tension roller C.
4. Stop the engine.
5. Operate the control lever repeatedly to release the pressure in the
hydraulic system.
6. Raise the control lever base.
To Next Page