Wacker Neuson EZ38 - Operation; Machine Controls and Basic Operation

OM EZ38 us 1.1 * ez38b500.fm 5-1
5
5Operation
5.1 Steering system
See “Travel levers and travel pedals”
5.2 Accelerator actuation
Manual throttle
Speed can be set continuously with throttle 18.
• Position A: maximum engine speed
• Position B: idling speed
High speed
The machine has two speeds that can be selected with the stabilizer-
blade lever 25.
Normal speed
The high-speed symbol (green) does not illuminate.
Switch in position 0.
High speed
The high-speed symbol (green) illuminates.
Switch in position 1.
The machine automatically switches to slow speed if it encounters a
higher driving resistance (for example in curves). If the driving resistance
is reduced, the machine automatically switches back to high speed.
Fig. 114
A
B
18
Fig. 115
25
I
0
Fig. 116
25
I
0
Operation