OM EZ38 us 1.1 * ez38b510.fm 5-27
5
Lifting gear applications
Crushing hazarddue to tipping over of machine!
Will cause serious injuries or death.
► Never exceed the weight and mass values specified in the stability table.
► If a joint rod or Powertilt unit with load hook is installed, the weight of
the attachment must be subtracted from the weight or mass value
specified in the table.
► Use the machine for lifting gear applications only if the mandatory
lifting gear (joint rod, for example) and safety equipment (optical and
acoustic warning devices (safe load indicator), stability table, load
holding control valves, for example) is installed, functional and
enabled.
If the weight or mass value is exceeded, there is a risk of damage to
property if the machine tips over.
► Never exceed the weight and mass values specified in the stability table.
Lifting gear applications are only allowed with both the following Wacker
Neuson lifting gear:
• Joint rod with lifting eye
• Powertilt unit with load hook
Fig. 162 (symbolic representation)
To Next Page
Loading...
