Wacker Neuson EZ38 - Daily Maintenance (Operator); Weekly Maintenance (Every 50 Service Hours) (Operator); Every 1000 Service Hours (Operator); Every 250 Service Hours (Wacker Neuson Service Center)

OM EZ38 us 1.1 * ez38w700.fm 7-3
7
Check the tracks for damage --
Check the travel gear for damage (track rollers, insert rolling bearings, for example) --
Check the piston rods of the hydraulic cylinders for damage --
Check the seat belt for damage --
Option
Check the load hook, joint rod, lifting eyes 7-53
Check the hydraulic quickhitch (Easy Lock) for damage --
Check the Powertilt for damage --
Weekly maintenance (every 50 service hours) (operator) Page
Lubricate the machine according to the lubrication plan 7-6
Option
Actuate Powertilt swivel device in final position for 1 minute
1
--
All steps for previous maintenance intervals --
Every 1000 service hours (operator) Page
Check the antifreeze --
All steps for previous maintenance intervals --
1. Rinse the system to remove dirt. Repeat the procedure in the opposite flow direction.
Daily maintenance (operator)
Only once after the first 50 service hours (Wacker Neuson service center)
Engine oil replacement (Yanmar 3TNV88-BPNS and 3TNV88F-EPNS) --
Engine oil filter replacement (Yanmar 3TNV88-BPNS and 3TNV88F-EPNS) --
Hydraulic oil filter insert replacement --
Drive gearbox oil replacement --
Check V-belt condition and tension --
Check the threaded fittings for tightness --
Check labels and Operator’s Manual for completeness and condition --
Pressure check of primary pressure limiting valves --
All steps for maintenance once a day and once a week --
Every 250 service hours (Wacker Neuson service center)
Engine oil replacement (Yanmar 3TNV88F-EPNS) --
Engine oil filter replacement (Yanmar 3TNV88F-EPNS) --
All steps for maintenance once a day and once a week --