EasyManua.ls Logo

Wacker Neuson EZ38 - Electrical System; Information Regarding the Electrical System

Wacker Neuson EZ38
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OM EZ38 us 1.1 * ez38w710.fm 7-47
7
7.13 Electrical system
Information regarding the electrical system
Maintenance and repair work on the electrical system may be performed
only by trained technical personnel or Wacker Neuson service centers.
Malfunctioning components of the electrical system must be replaced
by a Wacker Neuson service center.
Light bulbs and fuses may be replaced by the operator.
Alternator
Start the engine only if the battery is connected.
When connecting the battery, ensure that the poles are not inverted.
Have malfunctioning charge indicator lights immediately replaced.
WARNING
Explosion hazard when working on the electrical system!
Can cause severe injuries or death.
Fire, open flames and smoking is prohibited.
Do not place any tools on the battery.
Wear protective gloves and safety glasses.
Do not attempt to jump-start the machine if the battery is frozen or if the
acid level is low. The battery can rupture or explode. Replace the
battery immediately.
Disconnect the earthing lead of the battery before starting repair work
on the electrical system.
NOTICE
Damage to electrical components or the engine electronics.
When connecting the battery leads, ensure that the poles are not
inverted.
Do not place tools or other conductive articles on the battery – risk of
short circuit.
Do not interrupt voltage-carrying circuits at the battery terminals
because of the risk of sparking.
Do not disconnect the battery during the engine is running.
Environment
Dispose of old batteries in an environmentally friendly manner.

Table of Contents

Related product manuals