4-28 OM EZ38 us 1.1 * ez38i400.fm
4
Shatter protection (option)
Piercing/penetration hazard by objects from the front!
Work involving piercing/penetrating objects from the front will cause
accidents with serious injuries or death.
► If the machine is equipped with a canopy, a shatter protection must be
installed if an attachment (a hammer, for example) causes fragments
to fly around. This shatter protection takes over the function of a front
window. If the machine is equipped with a cabin, the front window must
be closed during hammer operation.
► Pay attention to the restricted work range (see fig. 97/98).
► Canopy operation is prohibited without a shatter protection.
Accident hazard in conditions of restricted visibility due to rain,
snowfall, dust etc.!
Restricted visibility can cause minor injuries.
► Stop machine operation immediately.
► Resume work only if visibility is no longer restricted.
Do not use brushes, steel wool or other abrasive cleaners for cleaning the
polycarbonate disc. Do not wipe dust in a dry state.
The shatter protection (canopy option) protects the operator against
fragments from the front.
► The machine owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.
► The machine owner must ensure that only work is performed that does
not require any higher protection.
► Accidents cannot be fully avoided despite equipping a machine with
protective structures.
The shatter protection can be combined with a protective Front Guard
structure if the machine is equipped with a canopy.
To Next Page
Loading...
