OM EZ38 us 1.1 * ez38w710.fm 7-45
7
Checking the hydraulic system for leaks
Leaks and damaged pressure lines must be immediately
repaired or replaced by a Wacker Neuson service center. This
not only increases the operating safety of the machine but also
helps to protect the environment.
► Leaks and damaged pressure lines must be immediately
repaired or replaced by a Wacker Neuson service center.
► Have hydraulic hoses replaced every 6 years from the date of
manufacture, even if they do not seem to be damaged.
• Do not operate the machine with leaking or damaged hydraulic system
components.
• Retighten leaking screwed fittings and hose connections only when the
system is not under pressure. Release the pressure before working on
pressurized lines.
• Do not weld or solder damaged or leaking pressure lines and threaded
fittings, but have damaged parts replaced.
• Wear protective equipment.
To Next Page