Wacker Neuson EZ38 - Powertilt;Powertilt with Easy Lock (Option) When Used in Water

7-26 OM EZ38 us 1.1 * ez38w700.fm
7
Control lever base
CAUTION
Crushing hazard in the area of the moving parts of the control lever
base!
Can cause minor injuries.
► Keep extremities and clothing clear of the window channel.
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Raise the control lever base.
3. Spray fluid grease onto guide lever A.
4. Spray fluid grease on both sides of the double spring B.
5. Raise and lower the control lever base several times.
Information
Keep the lubrication points clean and remove ejected grease.
Powertilt/Powertilt with Easy Lock (option) when used in water
• Apply grease to the lubrication points before using the Powertilt unit in
water.
• After using the Powertilt unit in water, apply grease to the lubrication
points to remove all water.
Fig. 241
A
B