EasyManua.ls Logo

Wacker Neuson EZ38 - General Notices Regarding Work Operation; Travel Operation in High Speed; Operation in Water

Wacker Neuson EZ38
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-44 OM EZ38 us 1.1 * ez38b510.fm
5
General notices regarding work operation
Travel operation
Traveling over obstacles (rocks, tree stumps etc.) can put a heavy load on
the travel gear and cause damage. Avoid traveling over obstacles if
possible.
If it cannot be avoided, lower the boom to ground level and travel over the
obstacle with the tracks at low speed.
Travel operation in high speed
Travel slowly on rough terrain and avoid start traveling and stopping
abruptly as well as changing direction suddenly.
The stabilizer blade must be at the front when traveling in high speed.
Operation in water
Do not immerse the rear end of the machine in water. Bear this in mind in
particular when leaving water, in order not to damage the machine.
Operation in salt water is prohibited.
Water must not reach any further than the upper edge of the tensioning
wheel.
Lubricate lubrication points again that were immersed in water for a longer
time in order to expel the old grease.
Never immerse the live ring or the upper carriage in water.
Fig. 195
Fig. 196
Fig. 197

Table of Contents

Related product manuals