Wacker Neuson EZ38 - Page 71

OM EZ38 us 1.1 * ez38i400.fm 4-23
4
Installing
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Remove all lights and mirrors (option).
3. A minimum 2 persons are required for installing/removing.
4. Install the lock nuts and screws on either side.
5. Tighten screws A (M10) and lock nuts on the left and right to 45 Nm
(33 ft.lbs).
6. Tighten screws B (M12) and lock nuts on the left and right to 87 Nm
(64 ft.lbs).
7. Install the light in position C (option).
8. Install the mirror in positions D (option).
Fig. 85
Fig. 86
B
A
Fig. 87
C D