Wacker Neuson EZ38 - Page 73

OM EZ38 us 1.1 * ez38i400.fm 4-25
4
Installing
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Remove all lights (option).
3. A minimum 2 persons are required for installing/removing.
4. Install the lock nuts and screws on either side.
5. Mounting point for protective structure: A.
6. Tighten screws B and lock nuts on the left and right to 65 Nm (48
ft.lbs.).
7. Mounting point for cabin/canopy: C
Fig. 88
Fig. 89
A
B
Fig. 90
C
C