BASIC INFORMATION
11
WL50
Warranty and liability1.3
Observe the following points:
Do not make any changes to the wheel loader.•
Use only Wacker Neuson- approved attachments for
•
your loader.
The loader many only be started up, operated and ser-•
viced as described in the Operator’s Manual.
Use the loader only if all the safety and protection de-•
vices are intact.
Observe the monitoring systems during operation.•
Repairs may only be performed by trained profession-•
als.
Follow the Operator’s Manual exactly.•
The manufacturer/supplier is not liable for damage
resulting from unintended use. The operator/user
is the sole bearer of this risk.
The Operator’s Manual must always be located in
the loader or at the place where it is being used.
Place the Operator’s Manual in the document pock-
et at the rear of the operator‘s platform.
Fig. 1
Document pocket